graphics kit for Kawasaki Ninja 250R / 300R / 650R / ZX6R / ZX-10R
299,90 €
INFO:
Replacing one logo, starting number and rider name is free of charge, this service is included in the price of each sticker. We ship within 24 hours after payment/approval of the design. The custom design will be created according to the customer’s requirements and will be sent to their email address for approval before printing.
ORDERING PROCESS:
Once your order has been received and your design approved, your decals will be manufactured and shipped with the highest priority. Your order will usually be shipped within 24 hours of payment/approval and should arrive by courier the following business day.
QUALITY:
We use only the highest quality materials available on the market with FLO technology (bubble-free application). All our graphic designs are printed using high quality DPI and laminated with the most durable materials on the market. You can choose from classic or full chrome materials (surface finish is available in glossy, matte, frozen or gold/silver glitter).
NOTE:
This product is not an original product of the motorcycle brand (the manufacturer is Motard Design). The final design with colors may not be exactly the same as the design in the product photo.
INSTALLATION:
Before you start, make sure your graphics are suitable for your motorcycle.
If any problems occur, please contact us by email before gluing. Send us precise information to info@motard-design.com with all the details of your order.
1. Remove old graphics or stickers using white spirit. It breaks down the chemicals in the adhesives and evaporates after a few minutes (it is important to remove all the old adhesive). Finally, clean all oily surfaces. DO NOT USE WATER on the adhesive side of the stickers, the stickers stick dry. I recommend starting by installing the stickers on a small part of the bike, such as the swingarm or fenders, to get the “skill” on how to do it properly.
2. First peel off a piece of backing paper, about 10cm, fold it back and cut the paper. Then place the sticker on the appropriate part of the motorcycle and press it gently into place. Then check the layout of the sticker to make sure it fits well on all sides (check the screw holes and ventilation holes). The stickers are somewhat malleable, if you “bend” a little, you can stretch the sticker back to flat or even use heat from a hair dryer, the sticker will soften and can be gently shaped.
3. Pay special attention to the edges. These are the main areas that need to be heated just before applying, otherwise the sticker will be “hard” and will not bend well around the edge. Be careful to touch the adhesive side of the graphic as little as possible. When the graphic is completely applied, press everything down firmly.
4. When everything is done, park the bike, 48 hours is the minimum for the glue to harden. Try to keep the bike in a stable temperature range – the recommended temperature is +20 °C. In case of a peeling edge, take a hair dryer, heat the sticker and press it again.
