Graphic set for Kawasaki Z500 / Z750 / Z800 / Z900 / Z1000

INFORMATION:
Changing one logo, race number, and rider’s name incurs no additional fees; this service is included in the price of every graphics kit. We ship within 24 hours of payment/design approval. Customized designs will be created per customer requests and sent to their email for approval before printing.

ORDER PROCESS:
Upon receipt of the order and design approval, the decals will be produced and prioritized for delivery. The shipment is typically dispatched within 24 hours of payment/approval and should arrive via courier the following business day.

QUALITY:
We use only the highest quality materials available on the market with FLO technology (bubble-free application of decals). All our graphic designs are printed using high-quality DPI and laminated with the most durable materials available. Choices include classic or full chrome materials (finish options are glossy, matte, frozen, or gold/silver glitter).

NOTE:
This product is not an original motorcycle brand product (the manufacturer is Motard Design). The final design and colors may not exactly match the design in the product photo.

INSTALLATION:
Before starting, ensure that your graphics are suitable for your motorcycle. If you encounter any issues, please contact us via email before applying. Send us exact information at info@motard-design.com with all the details of your order.

1. Remove the old graphics or stickers using technical gasoline. This breaks down the chemicals in the adhesives and evaporates after a few minutes (it is important to remove all old adhesive). Finally, clean all greasy surfaces. DO NOT USE WATER on the adhesive side of the decals; they are to be applied dry. I recommend starting the installation on a small section of the motorcycle, such as the swingarm or fenders, to develop your skills for proper application.

2. First, peel back a piece of the backing paper, about 10 cm, fold it back, and cut the paper. Then position the decal on the appropriate part of the motorcycle and gently press it into place. Check the layout of the decal to ensure it fits well on all sides (check the holes for screws and ventilation). Decals are somewhat moldable; if you slightly misalign, you can pull the decal back into position or even use heat from a heat gun to soften the decal for gentle reshaping.

3. Pay special attention to the edges. These are the main areas that need to be heated just before applying; otherwise, the decal will be stiff and will not conform well to the edge. Try to minimize contact with the adhesive side of the graphics. Once the graphics are fully applied, press everything firmly.

4. When everything is finished, park the motorcycle; 48 hours is the minimum for the adhesive to cure. Try to maintain the motorcycle within a stable temperature range – the recommended temperature is +20 °C. If an edge starts to lift, take a heat gun, warm the decal, and press it down again.