graphic kit for Voge 300 Rally
Vylepšite svoj Voge 300 Rally jedinečným grafickým kitom, ktorý prispôsobíme len pre vás, bez dodatočných poplatkov! S rýchlym spracovaním a najvyššou kvalitou sa váš motocykel stane skutočným ťahúňom na ceste!
INFORMATION:
Replacing one logo, race number, and rider’s name comes at no additional cost; this service is included in the price of every graphics kit. We ship within 24 hours after payment/design approval. A custom design will be created based on the customer’s requirements and sent to their email for approval before printing.
ORDER PROCESS:
Upon receipt of the order and design approval, the decals will be produced and delivered with the highest priority. The shipment is usually dispatched within 24 hours after payment/approval and should be delivered by courier the following business day.
QUALITY:
We use only the highest quality materials available on the market with bubble-free application technology. All our graphic designs are printed using high-quality DPI and laminated with the most durable materials available. There are classic options or full chrome materials (surface finish options include gloss, matte, frozen, or gold/silver glitter).
NOTE:
This product is not an original product of the motorcycle brand (the manufacturer is Motard Design). The final design with colors may not be identical to the design shown in the product photo.
INSTALLATION:
Before starting, ensure that your graphics are suitable for your motorcycle. If any issues arise, contact us via email before applying. Send us precise information to info@motard-design.com with all the details of your order.
1. Remove the old graphics or decals using technical gasoline. It breaks down the chemicals in the adhesives and evaporates after a few minutes (it’s crucial to remove all old adhesive). Finally, clean all greasy surfaces. DO NOT USE WATER on the adhesive side of the decals; the decals should be applied dry. I recommend starting the installation on a small part of the motorcycle, such as the swingarm or fenders, to gain “skill” on how to do it correctly.
2. First, peel off a piece of backing paper, about 10 cm, fold it back, and cut the paper. Then place the decal on the relevant part of the motorcycle and gently press it into place. After that, check the layout of the decal to ensure it fits well on all sides (check the holes for screws and ventilation openings). The decals are somewhat formable; if you slightly “shift,” you can stretch the decal back into line or even use heat from a hairdryer to soften the decal for gentle shaping.
3. Pay special attention to the edges. These are the main parts that need to be heated just before application; otherwise, the decal will be “stiff” and won’t bend well around the edge. Take care to touch the adhesive side of the graphics as little as possible. Once the graphics are fully applied, press everything firmly.
4. When everything is complete, park the motorcycle; 48 hours is the minimum for the adhesive to cure. Try to keep the motorcycle in a stable temperature range—the recommended temperature is +20 °C. In case of a peeling edge, take a heat gun, warm the decal, and press it again.
