graphic kit for KTM – QUART
Vytvorte si unikátny štýl s naším grafickým kitom pre KTM! Rýchle dodanie, bez poplatkov za prispôsobenie a kvalitné materiály – to všetko je založené na vašich požiadavkách.
INFORMATION:
Changing one logo, race number, and rider name incurs no additional fees; this service is included in the price of every graphics kit. We ship within 24 hours of payment/design approval. Custom designs will be created based on customer requests and sent to their email address for approval before printing.
ORDER PROCESS:
Upon receiving the order and design approval, graphics kits will be produced and prioritized for delivery. The package is usually dispatched within 24 hours of payment/approval and should arrive via courier the next business day.
QUALITY:
We use only the highest quality materials available on the market with FLO technology (bubble-free application of decals). All our graphic designs are printed using high-quality DPI and laminated with the most durable materials available. Choices of materials include classic or full chrome, with surface finishes available in glossy, matte, frozen, or gold/silver foils.
NOTE:
This product is not an original motorcycle brand product (the manufacturer is Motard Design). The final design with colors may not exactly match the design in the product photograph.
INSTALLATION:
Before starting, ensure that your graphics are suitable for your motorcycle. If any issues arise, contact us via email before applying. Send us precise information to info@motard-design.com with all details of your order.
1. Remove the old graphics or decals using technical gasoline. It breaks down the chemicals in the adhesives, and evaporates after a few minutes (it is important to remove all old glue). Finally, clean all oily surfaces. Do NOT USE WATER on the adhesive side of the decals; they are applied dry. I recommend starting the installation on a small part of the motorcycle, such as the swingarm or fenders, to gain skill in doing it correctly.
2. First, peel back a piece of the backing paper, about 10 cm, fold it back, and cut the paper. Then, position the decal on the relevant part of the motorcycle and gently press it into place. Next, check the layout of the decal to ensure it fits well on all sides (check screw holes and ventilation ports). Decals are somewhat moldable; if it deviates a little, you can pull the decal back into place or even use heat from a heat gun to soften it, allowing gentle shaping.
3. Pay special attention to the edges. These are the main areas that should be heated just before applying, otherwise, the decal will be stiff and will not fold well around the edge. Be sure to minimize contact with the adhesive side of the graphics. Once the graphics are fully adhered, press everything firmly.
4. Once everything is complete, park the motorcycle; a minimum of 48 hours is required for the adhesive to cure. Try to keep the motorcycle within a stable temperature range – the recommended temperature is +20 °C. In case of a lifting edge, take a heat gun, warm the decal, and press it down again.