Graphics kit for CF Moto 300 SR

INFORMATION:

Replacing one logo, starting number, and rider name is complimentary; this service is included in the cost of each decal. We dispatch within 24 hours after payment and design approval. The custom design will be tailored according to the customer’s specifications and emailed for approval prior to printing.

ORDER PROCESS:

Upon receiving your order and design approval, your decals will be produced and shipped with utmost priority. Typically, your order will ship within 24 hours of payment and approval and should arrive via courier the next business day.

QUALITY:

We utilize only premium materials available in the market, featuring FLO technology for a bubble-free application. All our graphic designs are printed at high DPI quality and laminated with the most robust materials available. You can choose from classic or full chrome finishes (available in glossy, matte, frozen, or gold/silver glitter).

NOTE:

This product is not an official motorcycle brand item (the manufacturer is Motard Design). The final design may differ slightly in color from the product photo.

INSTALLATION:

Before starting, ensure the graphics are appropriate for your motorcycle. For any issues, contact us via email prior to application. Provide precise details at info@motard-design.com regarding your order.

1. Remove old graphics or decals using white spirit. This solvent breaks down adhesive chemicals and evaporates within a few minutes (ensure all old adhesive is removed). Lastly, clean all oily surfaces. DO NOT USE WATER on the adhesive side of the decals; they must be installed dry. It is advisable to begin installation on a small section of the bike, such as the swingarm or fenders, to gain proficiency.

2. Start by peeling back a section of the backing paper, approximately 10cm, fold it back, and cut the paper. Place the decal on the designated area of the motorcycle and press it gently into position. Verify the placement of the decal to ensure proper alignment with screw holes and ventilation openings. The decals are slightly malleable; by bending gently, you can restore them to a flat position or even use a heat gun to soften and shape the decals as needed.

3. Pay particular attention to the edges. These areas require heating just before application to prevent the decal from being stiff and ensure proper adhesion around curves. Minimize contact with the adhesive side of the graphic. Once the graphic is affixed, press down firmly all over.

4. Once finished, store the motorcycle stationary; allow a minimum of 48 hours for the adhesive to cure. Maintain the bike within a stable temperature range—recommended temperature is +20 °C. If you notice any peeling edges, use a heat gun to warm the decal and press it down again.