graphic kit for TM – ARIVED

INFORMATION:
Changing one logo, starting number, and rider’s name incur no additional fees; this service is included in the price of each graphics kit. We dispatch within 24 hours after payment/design approval. A custom design will be created based on the customer’s requirements and will be sent to their email for approval before printing.

ORDER PROCESS:
Upon receiving the order and approving the design, the graphics will be produced and delivered with the highest priority. The package is typically dispatched within 24 hours after payment/design approval and should be delivered by courier the following working day.

QUALITY:
We only use the highest quality materials available on the market with FLO technology (bubble-free application of decals). All our graphic designs are printed using high-quality DPI and laminated with the most durable materials available. You can choose between classic or full chrome materials (surface finishes include glossy, matte, frozen, or gold/silver glitter).

NOTE:
This product is not an original motorcycle brand product (the manufacturer is Motard Design). The final design and colors may not exactly match the design shown in the product photo.

INSTALLATION:
Before starting, ensure that your graphics are suitable for your motorcycle. If any issues arise, contact us via email before applying. Send your precise information to info@motard-design.com with all details of your order.

1. Remove the old graphics or decals using technical gasoline. This breaks down the adhesives and evaporates after a few minutes (it’s important to remove all old glue). Finally, clean all greasy surfaces. DO NOT USE WATER on the adhesive side of the decals; the decals are applied dry. We recommend starting with the installation on a small part of the motorcycle, such as the swingarm or fenders, to gain skill on how to do it correctly.

2. First, peel off a piece of the backing paper, about 10 cm, fold it back, and cut the paper. Then place the decal on the respective part of the motorcycle and gently press it into place. Check the layout of the decal to ensure it fits well on all sides (check the screw holes and vent openings). Decals are somewhat moldable; if it “deviates” slightly, you can stretch it back to the flat or even use heat from a heat gun to soften the decal to gently mold it.

3. Pay special attention to the edges. These are the main parts that need to be heated just before applying; otherwise, the decal will be “stiff” and won’t bend well around the edge. Be careful to touch the adhesive side of the graphics as little as possible. Once the graphics are fully applied, press everything firmly.

4. Once everything is done, park the motorcycle; 48 hours is the minimum for the adhesive to cure. Try to keep the motorcycle within a stable temperature range – the recommended temperature is +20 °C. In case of a peeling edge, take a heat gun, warm the decal, and press it again.