Graphics kit for Can-Am Ryker 2018-2024

INFORMATION:
Replacing one logo, starting number, and rider name is complimentary; this service is included in the price of each graphics kit. We ship within 24 hours after payment and design approval. The custom design will be tailored to the customer’s specifications and sent to their email for approval prior to printing.

ORDER PROCESS:
Upon receiving the order and design approval, the decals will be produced and prioritized for delivery. Shipment typically occurs within 24 hours after payment and approval, with delivery expected by courier the next business day.

QUALITY:
We utilize only the finest materials available on the market featuring FLO technology for bubble-free installation. All our graphic designs are printed with high DPI and laminated using the most durable materials. You can choose from classic or fullchrome materials with finishes including glossy, matte, frosted, or gold/silver glitter.

NOTE:
This product is not an original item from the motorcycle brand; it is manufactured by Motard Design. The final design colors may differ from those shown in the product images.

INSTALLATION:
Before starting, ensure the graphics are compatible with your motorcycle. For any issues, contact us via email before application at info@motard-design.com, including all order details.
1. Remove old graphics or decals using technical gasoline. This will break down the adhesive chemicals and evaporate in minutes (ensure all old adhesive is removed). Finally, clean all greasy surfaces. DO NOT USE WATER on the adhesive side of the decals; application should be done dry. It is advisable to practice applying the stickers on a small section of the motorcycle, like the swingarm or fenders, to develop the correct technique.
2. First, peel back a piece of backing paper, approximately 10 cm, fold it over, and cut the paper. Then, position the decal on the designated area of the motorcycle and gently press it into place. Verify the layout to ensure a proper fit around screw holes and ventilation openings. The decals have some flexibility; if you bend them slightly, you can re-stretch them flat or use a heat gun for softening, allowing for gentle shaping.
3. Pay particular attention to the edges, as they require heating just before adhesion; otherwise, the sticker will be too rigid to contour properly. Minimize contact with the adhesive side during this process. Once the graphic is securely placed, press it down thoroughly.
4. After application, allow the motorcycle to remain stationary for a minimum of 48 hours for the adhesive to cure. Keep the motorcycle within a stable temperature range, ideally around +20 °C. If any edges peel, use a heat gun to warm the decal and press it down again.