graphic kit for SUR-RON / TALARIA GREEN

INFORMATION:

The exchange of one logo, race number, and rider’s name incurs no additional fees; this service is included in the price of every graphics kit. We ship within 24 hours after payment/design approval. Custom designs will be created according to customer requirements and sent to their email address for approval before printing.

ORDER PROCESS:

Upon receiving the order and design approval, the decals will be manufactured and prioritized for delivery. Shipments are typically dispatched within 24 hours after payment/approval and should be delivered by courier the following business day.

QUALITY:

We use only the highest quality materials available on the market with FLO technology (bubble-free application of decals). All our graphic designs are printed using high-quality DPI and laminated with the most durable materials available. Options include classic or full chrome materials (surface finishes are available in glossy, matte, frozen, or gold/silver glitter).

NOTE:

This product is not an original product of the motorcycle brand (the manufacturer is Motard Design). The final design with colors may not be exactly identical to the design in the product photo.

INSTALLATION:

Before starting, make sure your graphics are suitable for your motorcycle. If any issues arise, contact us via email before applying. Send us the specific information to info@motard-design.com with all the details of your order.

1. Remove the old graphics or decals using technical gasoline. It breaks down the chemicals in adhesives and evaporates after a few minutes (it is important to remove all old adhesive). Finally, clean all greasy surfaces. Do NOT USE WATER on the adhesive side of the decals; they are dry-applied. I recommend starting the installation on a small part of the motorcycle, such as the swingarm or fenders, to gain the skill of doing it correctly.

2. First, peel back a piece of the backing paper, about 10 cm, fold it back, and cut the paper. Then, place the decal on the appropriate part of the motorcycle and gently press it into place. Afterward, check the layout of the decal to ensure it fits well on all sides (check screw holes and ventilation openings). Decals are somewhat moldable; if you deviate a little, you can pull the decal back into line or even use heat from a heat gun; the decal will soften and can be gently shaped.

3. Pay special attention to the edges. These are the main areas that need to be heated just before application; otherwise, the decal will be stiff and won’t conform well to the edge. Be careful to touch the adhesive side of the graphics as little as possible. Once the graphics are fully applied, press everything down firmly.

4. After everything is done, park the motorcycle; allow a minimum of 48 hours for the adhesive to cure. Try to keep the motorcycle within a stable temperature range – the recommended temperature is +20 °C. If an edge starts to lift, take a heat gun, warm the decal, and press it down again.